Edited assembly video of the Cyberspace x BUGER WORKS BOX60 case, pre-assembled DZ60 v2 soldered PCB, with polycarbonate plate (to let the light through), Cherry tactile grey switches, and KAT Cyberspace keycaps.

Warnings for occasional shaky cam (I did this as practice), and potential trypophobia from the bare switches on the PCB.

Review part; I had trouble with the PCB sitting higher than the case seems to expect. I didn't need the stand-offs and screws included, but did need to supply my own M2 x 6mm screws. I also can't use the case USB port as is, not until I make the slot bigger. Otherwise went together smoothly.

edit The case support between keys 7 and 8 has dislodged a component on the board, breaking a solder joint, and making the 7 key not work. This support needs to be trimmed down. Video of repair here; https://diode.zone/w/kH7uwDyQKvw5sXpuAe9ysE end of edit

Music credit; Outta Space Seeds by 2steps4ward (c) copyright 2010 Licensed under a Creative Commons Attribution Noncommercial (3.0) license. http://dig.ccmixter.org/files/2steps4ward/25857 Ft: Norm Peterson, Greg Bertinelli