This useless box has a 0.96 inches OLED and a gyro/accel sensor connected to an Arduino Nano.

The gyro is an MPU-6050 and the OLED is an SSD1306 (4 pins/i2c).

This project was heavily inspired by https://www.reddit.com/r/arduino/comments/3vmw1k/ive_been_playing_with_a_gyroscope_and_an_lcd/ / http://imgur.com/gallery/fQUAx/new although some of the code has been (poorly) rewritten to match the hardware.

A stickers from the NuidDuHack was used for finition, the box was printed from a Dagoma Discovery 200.

Code and Sketch: https://github.com/tobozo/Rotatey_Cube

Linkception: https://twitter.com/TobozoTagada/status/764093352283209728